Puromet^™
MTS9500

ポリスチレン系マクロポーラス, アミノリン酸官能基キレート樹脂

Product PDF

Languages

Chinese

German

イタリアの

スペインの

フランスの

ポルトガル語

ルーマニアの

ロシア

日本の

最終精製

英語

ここでヘルプ

私たちの常に準備ができている技術サポートとサービスチームは、あなたの最も信頼できるリソースになるために追加のステップを踏み出します。私たちはあなたのためにここにいます。

Overview

Literature

Resources

Principal Applications

鉄除去
銅除去
亜鉛除去
アンチモン除去
ビスマス除去

Advantages

高い選択性

Typical Packaging

1 ft³ Sack
25 L Sack
5 ft³ Drum (Fiber)
1 m³ Supersack
42 ft³ Supersack

ENGINEERING-BULLETIN

Puromet MTS9500: Polystyrenic Macroporous, Aminophosphonic Chelating Resin

Typical Physical & Chemical Characteristics:

Polymer Structure	ポリスチレン系ジビニルベンゼン架橋マクロポーラス型ポリマー
Appearance	球形ビード
Functional Group	アミノリン酸
Ionic Form	Na⁺形
カルシウム交換容量 (最小)	26 g/L
水分含有率	55 - 65 % (Na⁺形)
粒径範囲	300 - 1200 µm
< 300 µm (max.)	1 %
均一係数 (最大)	1.7
可逆的膨張, H⁺ → Na⁺ (最大)	50 %
比重	1.13
見かけ密度 (概算)	710 - 760 g/L (44.4 - 47.5 lb/ft³)
温度制限	80 °C (176.0 °F)

油圧特性

Pressure Drop

The pressure drop across a bed of ion exchange resin depends on the particle size distribution, bed depth, and voids volume of the exchange material, as well as on the flow rate and viscosity of the influent solution. Factors affecting any of these parameters— such as the presence of particulate matter filtered out by the bed, abnormal compressibility of the resin, or the incomplete classification of the bed—will have an adverse effect, and result in an increased head loss. Depending on the quality of the influent water, the application and the design of the plant, service flow rates may vary from 10 to 40 BV/h.

Pressure Drop Across Resin Bed

Backwash

During up-flow backwash, the resin bed should be expanded in volume between 50 and 70% for at least 10 to 15 minutes. This operation will free particulate matter, clear the bed of bubbles and voids, and reclassify the resin particles ensuring minimum resistance to flow. When first putting into service, approximately 30 minutes of expansion is usually sufficient to properly classify the bed. It is important to note that bed expansion increases with flow rate and decreases with influent fluid temperature. Caution must be taken to avoid loss of resin through the top of the vessel by over expansion of the bed.

Backwash Expansion of Resin Bed

Puromet™ MTS9500