Purolite^™ Puropack^™
PPC100E

ポリスチレン系ゲル, 強酸性カチオン交換樹脂, ナトリウム形, パックドベッドグレード

Product PDF

Languages

Chinese

German

イタリアの

スペインの

フランスの

ポルトガル語

ルーマニアの

ロシア

日本の

最終精製

英語

ここでヘルプ

私たちの常に準備ができている技術サポートとサービスチームは、あなたの最も信頼できるリソースになるために追加のステップを踏み出します。私たちはあなたのためにここにいます。

Overview

Literature

Principal Applications

軟水ー飲料水

Advantages

高線速度用途
効率的な分離
標準樹脂より低い圧力損失
低溶出分

Systems

パックドベッドシステム

Regulatory Approvals

WQAによるNSF/ANSI-61 Standard証明書

Typical Packaging

1 ft³ Sack
25 L Sack
5 ft³ Drum (Fiber)
1 m³ Supersack
42 ft³ Supersack

ENGINEERING BULLETIN

C100 Sodium Cycle

Typical Physical & Chemical Characteristics:

Polymer Structure	ジビニルベンゼンにより架橋されたポリスチレンゲル
Appearance	球形ビード
Functional Group	硫酸
Ionic Form	Na⁺形
総交換容量（最小）	1.9 eq/l (41.5 Kgr/ft³) (Na⁺形)
水分含有率	46 - 50 % (Na⁺形)
平均径	650 ± 50 µm
均一係数	1.1 - 1.2
可逆的膨張, Na⁺ → H⁺(最大)	10 %
可逆的膨張, Ca²⁺ → Na⁺ (最大)	8 %
比重	1.27
見かけ密度 (概算)	790 - 830 g/L (49.4 - 51.9 lb/ft³)
温度制限	120 °C (248.0 °F)

油圧特性

Pressure Drop

The pressure drop across a bed of ion exchange resin depends on the particle size distribution, bed depth, and voids volume of the exchange material, as well as on the flow rate and viscosity of the influent solution. Factors affecting any of these parameters— such as the presence of particulate matter filtered out by the bed, abnormal compressibility of the resin, or the incomplete classification of the bed—will have an adverse effect, and result in an increased head loss. Depending on the quality of the influent water, the application and the design of the plant, service flow rates may vary from 10 to 40 BV/h.

Pressure Drop Across Resin Bed

Backwash

During up-flow backwash, the resin bed should be expanded in volume between 50 and 70% for at least 10 to 15 minutes. This operation will free particulate matter, clear the bed of bubbles and voids, and reclassify the resin particles ensuring minimum resistance to flow. When first putting into service, approximately 30 minutes of expansion is usually sufficient to properly classify the bed. It is important to note that bed expansion increases with flow rate and decreases with influent fluid temperature. Caution must be taken to avoid loss of resin through the top of the vessel by over expansion of the bed.

Backwash Expansion of Resin Bed

Purolite™ Puropack™ PPC100E