Overview

Principalele Aplicatii

  • Eliminarea borului din apa ultrapură

Ambalaje tipice

  • Cutie de1 CF
  • Butoi (plastic) de 50L
  • Butoi (Fibră) de 5 CF

Caracteristici tipice fizice si chimice

Structura polimerica polimer polistiren macroporos reticulat cu DVB
Aspect Perle sferice
Grupari functionale N-metilglucamina
Forma ionica forma FB
Capacitatea totală (min.) 0.6 eq/L (13.1 Kgr/ft³) ( forma FB )
reținerea umidității 61 - 67 % ( forma Cl- )
Distribuția granulometrică 425 - 850 µm
< 425 µm (max.) 5 %
TOC (max.) < 5 ppb TOC dupa 48 ore de spalare la un debit de 30 BV/h
coeficient de uniformitate (max.) 1.3
densitate specifică 1.1
Greutate de transport (aprox.) 670 - 730 g/L (41.9 - 45.6 lb/ft³)
Limita de temperatură 60 °C (140.0 °F)
Notă de subsol Calitatea apei de spalare:> 17.5 MΩ cm; < 2 ppb TOC

Caracteristici hidraulice

Pressure Drop

The pressure drop across a bed of ion exchange resin depends on the particle size distribution, bed depth, and voids volume of the exchange material, as well as on the flow rate and viscosity of the influent solution. Factors affecting any of these parameters— such as the presence of particulate matter filtered out by the bed, abnormal compressibility of the resin, or the incomplete classification of the bed—will have an adverse effect, and result in an increased head loss. Depending on the quality of the influent water, the application and the design of the plant, service flow rates may vary from 10 to 40 BV/h.

Pressure Drop Across Resin Bed